Metal Laser Cutting for OEM Production
Seaborn Manufacturing provides built to print sheet and plate laser cutting for OEMs, equipment manufacturers and industrial buyers across Ontario. We produce repeat components from customer drawings and CAD data, primarily in carbon steel, stainless steel and aluminum.
Seaborn can supply the material and deliver cut-only parts ready for production, or continue with forming, welding, inspection and assembly when required. We are best suited to recurring parts, scheduled releases and larger industrial requirements where consistent quality and dependable supply matter.
Sheet Metal Laser Cutting
Heavy Plate Laser Cutting
Carbon Steel Laser Cutting
Stainless Steel and Aluminum Laser Cutting
Laser Cutting for Repeat OEM and Industrial Production
Seaborn is structured for built to print laser work that must be repeated reliably. We support OEMs, equipment manufacturers and industrial buyers requiring consistent parts from approved drawings, dependable releases and clear production requirements.
Heavy Plate Laser Cutting up to 2 Inches
Seaborn’s 20 kW fiber laser cuts carbon steel plate up to 2 inches thick for OEM and industrial production. This capability supports base plates, gussets, brackets, equipment components, skid parts and other built to print plate parts requiring accurate profiles and repeatable results.
Seaborn has produced 0.315 inch wide grate strips from 1 inch thick carbon steel plate an unusually demanding width to thickness ratio.
Heavy plate components can be supplied as laser-cut parts or continue into forming, machining, welding and assembly. Seaborn is particularly well suited to repeat requirements and scheduled releases where material supply and multiple operations can be coordinated through one supplier.
Heavy Plate Laser Cutting Capabilities
| Material | Standard Production Thickness |
|---|---|
| Carbon / mild steel | up to 2 in. (51 mm) |
| Stainless steel | up to 1 in. (25.4 mm) |
| Aluminum | up to 1 in. (25.4 mm) |
Thick Carbon Steel Plate Laser Cutting
Carbon steel is Seaborn’s primary material for heavy plate laser cutting. We produce built to print base plates, gussets, mounting plates, brackets, equipment components and fabrication-ready blanks in common structural grades including A36, 44W/300W and 50W/350W. Other alloy and abrasion-resistant grades are reviewed against the customer drawing and material specification.
Stainless Steel and Aluminum Laser Cutting
Seaborn laser cuts stainless steel and aluminum sheet and plate up to 1 inch thick for repeat OEM and industrial components. Common materials include 304, 316 and 430 stainless steel and 5052, 6061 and 7075 aluminum. Material grade, condition, tolerances and edge requirements are reviewed against the customer drawing before quoting.
Laser Cutting Services Across Southern Ontario
Seaborn Manufacturing provides sheet and plate laser cutting from Waterloo for OEMs, equipment manufacturers and industrial buyers across Southern Ontario. Our primary service area extends from Peterborough through the GTA, Hamilton, Kitchener-Waterloo, Cambridge, Guelph, London and Windsor. Production requirements outside this area may also be considered when the work is a good fit.
Frequently Asked Questions
For standard production work, Seaborn laser cuts carbon steel up to 2 inches thick and stainless steel and aluminum up to 1 inch thick. Material grade, part geometry, tolerances and required edge condition are reviewed before quoting.
Yes. Seaborn is best suited to built to print parts ordered repeatedly or released on a production schedule. We retain approved production data, supply and stock sheet material, and can coordinate laser cutting with forming, welding and assembly when required.
Yes. Seaborn supplies cut-only sheet and plate components when the quantities, material requirements and schedule fit our production operation. Our strongest fit is recurring OEM and industrial work, although substantial one-time production orders may also be suitable.
Send a PDF drawing showing the material grade, thickness, tolerances and revision, along with the quantity per release, expected annual volume and required delivery date. Identify any forming, welding, machining, finishing or assembly required.
Related Production Services
Need more than a laser-cut part? Seaborn can carry suitable production components into Sheet Metal Fabrication, Metal Fabrication or Heavy Fabrication. For round, square and rectangular tube, visit Tube Laser Cutting.